![background image](http://html2.mh-extra.com/html/harman/martin-mac-ultra-performance/martin-mac-ultra-performance_user-manual_3985973005.webp)
Introduction
5
• Check that the installation is safe and secure.
• If the fixture is moved from a cold to a warm environment, remove it from its flightcase or packaging and
give it at least two hours to acclimatize before applying power. This will help to avoid damage due to
condensation.
• Check that the fixture is in perfect condition. Do not apply power to a fixture that is obviously damaged, or
you may create a safety risk and make the damage worse.
• Check that the base is fastened securely so that the torque reaction when the head moves will not cause
the base to move.
• Check that the head tilt lock is released.
• Be prepared for the head to move suddenly. Check that there will be no risk of collision with persons or
objects.
• Be prepared for the fixture to light up suddenly. Check that no-one is looking at the fixture from close
range.
The fixture does not have an On/Off switch. To apply power to the fixture, connect the power input cable to a
source of AC power that is within the range 200-240 V (nominal), 50/60 Hz. The fixture’s Neutrik powerCON
TRUE1 TOP connectors can also be connected live or under load.
Note that whenever power is applied to the fixture, it will reset all effects and functions to their home
positions and the fixture head will move. This process takes several seconds.
Summary of Contents for Martin MAC Ultra Performance
Page 1: ...MAC Ultra Performance User Guide...
Page 41: ...www martin com...