Harman Martin Exterior Wash 300 Series, User Manual

Page: 9 / 40

Martin
®
Exterior Wash
TM
300 Series User Manual 9
Introduction
This user manual covers the following Exterior Wash 300 Series lighting fixtures from Martin®:
•
Exterior Wash 300 with individual red, green, blue, and white LEDs optimized for long-throw applications
•
Exterior Wash 310 with premixed quad-color LEDs for general applications
•
Exterior Wash 320 with mixable warm white and cold white LEDs that can achieve white tones ranging in
color temperature from 2700 K to 6500 K.
The Exterior Wash 300 Series is a powerful, compact and energy-efficient line of LED lighting fixtures
designed to illuminate large structures, building facades and bridges. All models have a built-in control
panel and LCD display for ease of use, a wide selection of beam angles and ingress protection suited to
permanent outdoor use. A discreet, optional snoot integrates seamlessly with the fixtures’ sleek design to
put the light right where you want it.
Each fixture is supplied with this user manual and an optional control panel cover plate to deter
unauthorized access. They are prepared for hard wiring with 1.8 m (5.9 ft.) cables for power and data
connection.
Honeycomb louvers that reduce lateral glare are also available from Martin as accessories for the Exterior
Wash 300 series.
Fixture overview
1 Front ring with recessed channel for optional diffuser lenses
2 Tilt lock (one on each side)
3 Control panel
4 Mounting bracket
5 Secondary attachment point
6 DMX combined input/output cable
7 AC power cable
8 Pressure relief valve
Before using the product for the first time
1. Read ‘Safety information’ on page 5 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to
operate a damaged fixture.
3. If testing and/or setting up the fixture before it is hard-wired to a mains supply, install a local power
plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
5. Check the support pages on the Martin Professional website at www.martin.com for the most recent
user documentation and technical information about the fixture. Martin user manual revisions are
identified by the revision letter at the bottom of the inside cover.