Martin
®
Exterior Wash
TM
300 Series User Manual
21
f)
Press MENU to select the next scene to modify.
g)
When done editing scenes, press MENU again to return to the PROGRAM SHOW menu.
4.
To modify scene transitions, select FADE TIME and press ENTER. Press UP or DOWN to select a
fade time from 0 to 120 seconds. Press ENTER.
5.
To modify the length of time each scene is displayed before fading to the next scene, select HOLD
TIME and press ENTER. Press UP or DOWN to select a duration from 0 to 600 seconds. Press
ENTER.
Manual mode
Fixture output can be set manually from the control panel as follows:
1.
Access the control menu and select MANUAL MODE. Press ENTER.
2.
Select an attribute to modify and press ENTER.
3.
Adjust the attribute level from 0 to 255 with the arrow buttons. Press ENTER.
4.
Repeat for each attribute.
5.
To exit manual mode, press MENU.
Display setting
The DISPLAY SETTING menu provides options to invert, dim, and turn off the control panel display.
Display inverse
For easier reading when the fixture is mounted upside down, flip the display as follows:
1.
Access the control menu and select DISPLAY SETTINGS. Press ENTER.
2.
Select DISPLAY INVERSE and press ENTER.
3.
Select YES to invert the display or NO for normal reading.
4.
Press ENTER.
Display auto turn off
The display can be set to stay on or to turn off 1 minute after the last key press. To set display behavior:
1.
Access the control menu and select DISPLAY SETTINGS. Press ENTER.
2.
Select DISPLAY AUTO TURN OFF and press ENTER.
3.
Select NO to keep the display illuminated, or YES to have the display turn off automatically after 1
minute.
4.
Press ENTER.
Automatic test
The test function allows you to verify LED performance quickly from the control panel. All LEDS are first
set to 100 percent. LEDs are then tested together by color (300 & 310 models), or color temperature (320
model). Finally, each LED is tested individually.
To run the automatic test from the control panel, access the control menu, select AUTOMATIC TEST and
press ENTER. Press MENU to end the test.
Fixture status
LED temperature, hours, and software version are available from the FIXTURE STATUS menu or RDM.
Fixture config
The FIXTURE CONFIG menu contains additional settings for customizing behavior.
Host/client operation – important guidelines
Fixtures operating in standalone mode can be synchronized in host/client operation if they are all
connected to each other on a DMX data link as described under ‘Control data link’ on page 17 and if they
have the same type of LEDs. In other words, Exterior Wash 100, 200 and 300 fixtures can be
synchronized with each other in host/client operation, Exterior Wash 110, 210 and 310 fixtures can be
synchronized with each other and Exterior Wash 120, 220 and 320 fixtures can be synchronized with each
other.
In host/client operation, one fixture running a standalone show – the ’host’ fixture –sends ‘fade’ and ’wait’
signals to the other fixtures running standalone shows – the ’client’ fixtures – so that scene change times
Summary of Contents for Martin Exterior Wash 300 Series
