background image

 Martin

®

 Exterior Wash

TM

 300 Series User Manual 

35 

Accessories 

Exterior Wash 300 Series Narrow Diffuser Kit  .................................................................. P/N  91610155 
Exterior Wash 300 Series Medium Diffuser Kit  .................................................................  P/N  91610156 
Exterior Wash 300 Series Wide Diffuser Kit  ..................................................................... P/N 91610157 
Exterior Wash 300 Series Very Wide Diffuser Kit  ............................................................. P/N  91610158 
Exterior Wash 300 Series Asymmetric Diffuser Kit  ........................................................... P/N 91610159 
Exterior Wash 300 Series Glare Shield / Snoot  ................................................................ P/N  91611735 
Honeycomb Louver for Exterior Wash 300 and 320 .......................................................... P/N  91611858 
Honeycomb Louver for Exterior Wash 310 ........................................................................ P/N 91611837 

Related Items  

Martin Companion software suite incl. software uploader .............. Free download from www.martin.com 
Martin Companion Cable USB/DMX Interface ................................................................... P/N 91616091 
Martin RDM 5.5 Splitter ..................................................................................................... P/N 90758150 

Ordering Information  

Exterior Wash 300, 7.5°, EU, Aluminum ............................................................................ P/N 90507070 
Exterior Wash 300, 7.5°, US, Aluminum ............................................................................ P/N 90507071 
Exterior Wash 310, 11°, EU, Aluminum ............................................................................. P/N 90507075 
Exterior Wash 310, 11°, US, Aluminum ............................................................................. P/N 90507085 
Exterior Wash 320, 7.5°, EU, Aluminum ............................................................................ P/N 90507080 
Exterior Wash 320, 7.5°, US, Aluminum ............................................................................ P/N 90507081 

Specifications subject to change without notice. For latest product specifications, see www.martin.com 

 

 

 

 

 

Disposing of this product 

Martin products are supplied in compliance with Directive 2012/19/EC of 
the European Parliament and of the Council of the European Union on 
WEEE (Waste Electrical and Electronic Equipment), where applicable. 
Help preserve the environment! Ensure that this product is recycled at 
the end of its life. Your supplier can give details of local arrangements for 
the disposal of Martin products 

 

 

 

FCC compliance 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense.

 

 

 

Summary of Contents for Martin Exterior Wash 300 Series









































Reviews: