Harman Martin Exterior Projection 1000, User Manual

Page: 43 / 60

Exterior Projection 1000 User Manual 43
Remote Device Management (RDM)
The Exterior Projection 1000 features Remote Device Management (RDM) capability. RDM lets
you get information from the fixture and change settings in the fixture remotely over the DMX data
link.
To communicate with the fixture via RDM, use an RDM-compatible DMX controller.
Before you can communicate with fixtures, you must send a scan command (‘Disc Unique
Branch’) from the RDM controller to detect the devices on the data link. For other details of
communication with fixtures, see the RDM-compatible DMX controller’s user manual.
RDM commands are normally referred to as Parameter IDs or PIDs. The Exterior Projection 1000
responds to the following Parameter IDs:
Device discovery
Parameter ID
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
Device management
Parameter ID GET SET
COMMS_STATUS

QUEUED_MESSAGE

STATUS_MESSAGES

STATUS_ID_DESCRIPTION

CLEAR_STATUS_ID

SUPPORTED_PARAMETERS

PARAMETER_DESCRIPTION

DEVICE_INFO

DEVICE_MODEL_DESCRIPTION

MANUFACTURER_LABEL

DEVICE_LABEL
 
FACTORY_DEFAULTS
 
SOFTWARE_VERSION_LABEL

DMX_PERSONALITY
 
DMX_PERSONALITY_DESCRIPTION

DMX_START_ADDRESS
 
SLOT_DESCRIPTION

SENSOR_DEFINITION

SENSOR_VALUE
 
DEVICE HOURS
 
LAMP_HOURS
 
DEVICE_POWER_CYCLES
 