Exterior Projection 1000 User Manual
23
To set display behavior:
1. Select DISPLAY AUTO OFF and press ENTER.
2. Select NO to keep the display illuminated, or YES to have the display turn off automatically
after 1 minute.
3. Press ENTER to confirm.
Display intensity
To adjust the brightness of the control panel display:
1. Select INTENSITY and press ENTER.
2. Scroll to a value from 0 to 100%.
3. Press ENTER to confirm.
Locking the display
The onboard control panel and display are unlocked by default. If you want to prevent
unauthorized tampering, you can lock the control panel. If the control panel is locked, it is
impossible to make any changes in the control menus until the service password
111
has been
entered to unlock it.
To lock or unlock the control panel and display:
1. Select LOCK DISPLAY and press ENTER.
2. Select ON to lock the display or select OFF to unlock.
3. Press ENTER to confirm.
Setting the user password
Besides the service password
111
which cannot be changed, the Exterior Projection 1000 also has
a user password that you can change. The user password is set to
123
by default. To change the
user password:
1. Select SET PASSWORD and press ENTER.
2. Scroll to a value from 0 to 999.
3. Press ENTER to confirm.
Fixture status
You can view the following fixture status information in the FIXTURE STATUS menu:
•
Current temperature of LED engine.
•
Total number of hours the fixture has been in use.
•
Total number of hours the LEDs have been powered on.
•
Software version currently installed in the fixture.
You can also call up fixture status information from an RDM-compatible controller.
Fixture configuration (including master/slave operation)
The FIXTURE CONFIG menu contains additional settings for customizing behavior.
Master/slave operation – important guidelines
Fixtures operating in standalone mode can be synchronized in master/slave operation if they are
all connected to each other on a DMX data link.
In master/slave operation, one fixture running a standalone show – the ’master’ fixture –sends
‘fade’ and ’wait’ signals to the other fixtures running standalone shows – the ’slave’ fixtures – so
that scene change times in slave fixtures are synchronized with the scene change times in the
Summary of Contents for Martin Exterior Projection 1000
