background image

 24

ERA 500 Hybrid IP Safety and Installation Manual

Specifications

Physical

Length (head)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .560 mm (22.1 in.)
Width (base)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360 mm (14.2 in.)
Length (base). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .467 mm (18.4 in.)
Width (across yoke) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .492 mm (19.4 in.)
Height (head straight up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .776 mm (30.6 in.)
Height (maximum) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .796 mm (31.4 in.)
Minimum center-to-center distance in side-by-side installation . . . . . . . . . . . . . . . . . . . . .700 mm (27.6 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  46.5 kg (102.6 lbs.)

Dynamic Effects

Color mixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CMY, independently variable 0-100%
Color wheel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9 color filters incl. 3 CT filters plus open
Rotating gobo wheel  . . . . . . . . . . . . 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel  . . . . . . . 11 gobos, gobo animation zone plus open, wheel indexing, rotation and shake
Beam effects  . . . . . . . . . . . . . . . . . . . . . . . .  2 rotating/indexing prisms (8-facet circular and 6-facet linear)
Diffuser  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spot diffuser / beamsmoother
Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strobe effect, pulse effects, instant open and blackout
Dimming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0 - 100% continuous
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Motorized
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Motorized
Pan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540°, coarse & fine control and speed
Tilt  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°, coarse & fine control and speed

Control and Programming

Control options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DMX, RDM
16-bit control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimming, pan and tilt 
Setting and addressing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Control panel with backlit LCD display
DMX channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DMX compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .USITT DMX512/1990
RDM compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ANSI/ESTA E1.20
Transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Opto-isolated RS-485

Optics

Light source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 W Philips MSD Platinum 18 R LL
Average lamp lifetime to >70% output . . . . . . . . . . . . . . . . . . . . . . . . . .  1500 hours at nominal lamp power
Entertainment lamp lifetime to >70% output  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6000 hours
Front lens diameter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 mm (5.63 in.)
Zoom range (half peak with beamsmoother applied). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2° - 40°

Photometric Data

Maximum luminous flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 000 lumens
CCT (Calibrated Color Temperature) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6500 K (+/-350K)
CRI (Color Rendering Index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>70

Construction

Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . .Die-cast aluminum, high-impact flame-retardant thermoplastic
Color  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Black/white
Protection rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP65
Operating environment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Suitable for wet locations

Rotating gobos

External diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.8 mm +0 / -0.2 mm (0.622 in. +0 / -0.008 in.)
Maximum image diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 mm (0.393 in.)
Maximum gobo thickness  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 mm (0.043 in.)
Material  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Borofloat 33

Summary of Contents for Martin ERA 500 Hybrid IP





























Reviews: