Harman Martin ELP WW IP, User Manual

Page: 34 / 39

34 Martin® ELP WW IP User Manual
Minimum distance to illuminated surfaces ...................................................... 0.5 m (1.6 ft.)
Connections
AC power in/thru ............................................ IP65-rated Neutrik PowerCON TRUE1 TOP
DMX & RDM data in/thru ................................................................... IP65-rated 5-pin XLR
Electrical
AC power ...............................................................................100-240 V nominal, 50/60 Hz
Power supply unit ...................................................... Auto-ranging electronic switch-mode
Idle power (zero intensity) .............................................................................................. 5 W
Half-cycle RMS inrush current at 230 V, 50 Hz ........................................................ 18.0 A
Fixture link via PowerCON at 100-120 V ..................................................... Up to 4 fixtures
Fixture link via PowerCON at 200-240 V ..................................................... Up to 9 fixtures
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
110 V, 60 Hz ..................................................................................... 2.6 A, 280 W, PF 0.99
208 V, 60 Hz .................................................................................... 1.4 A, 270 W, PF 0.97
230 V, 50 Hz ..................................................................................... 1.2 A, 269 W, PF 0.96
240 V, 50 Hz ..................................................................................... 1.2 A, 268 W, PF 0.96
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of
+/- 10%.
Thermal
Cooling ......................................................... Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.) .................................................... 40° C (104° F)
Minimum ambient temperature (Ta min.) .......................................................... 0° C (32° F)
Total heat dissipation (calculated, +/- 10%, at full intensity, full white) ........... 1000 BTU/hr.
Approvals
Global CB Certification/IECEE ........................................... IEC 60598-2-17 (IEC 60598-1)
EU safety ............................................ EN 60598-2-17 (EN 60598-1), EN 62471, EN62493
EU EMC ......................................................................... EN 55015, EN 55032, EN 55035,
EN 61000-3-2, EN 61000-3-3, EN 61547
US safety ................................................................................................................. UL 1573
US EMC .............................................................................................. FCC Part 15 Class B
Canadian safety .................................................................................... CSA C22.2 No. 166
Canadian EMC ............................................ ICES-3 (B)/NMB-3 (B); ICES-5 (B)/NMB-5 (B)
Australia/NZ ................................................................................................................. RCM
Included Items
Mounting bracket
User manual
Accessories
Power cables, 16 A
Power input cables*
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to
TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.) ....................... P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to
TRUE1 NAC3FX-W (female), 5 m (16.4 ft.) ....................... P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to
TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.) ....................... P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to
TRUE1 NAC3FX-W (female), 5 m (16.4 ft.) ........................ P/N 91610174
Power relay cables*
Power Relay Cable, H07RN-F, 2.5 mm
2
, TRUE1-TRUE1 0.45 m (1.5 ft.) ... P/N 91611784
Power Relay Cable, H07RN-F, 2.5 mm 2 , TRUE1-TRUE1 1.2 m (3.9 ft.) ..... P/N 91611785
Power Relay Cable, H07RN-F, 2.5 mm
2
, TRUE1-TRUE1 2.5 m (8.2 ft.) ..... P/N 91611796