Martin® ELP WW IP User Manual
25
Use of gobos and irises
The fixture will accept an A-size or B-size goboholder or an iris (items not included with the fixture)
in the gobo/accessory gate. There is a sliding cover over the gate to prevent light spill and retain
the gobo holder in the fixture. To install a goboholder or iris:
1.
Allow the fixture to cool. See drawing below. Loosen but do not remove the two thumbscrews
A
at the sides of the lens tube housing
B,
then slide the lens tube housing
towards the front of
the fixture.
2.
Slide the goboholder
C
into the accessory gate in the fixture.
3.
Slide the lens tube housing
B
back towards its original position so that it holds the goboholder
in place and re-tighten the thumbscrews
A
.
C
A
A
B
Summary of Contents for Martin ELP WW IP
Page 1: ...ELP WW IP LED Profile User Manual...
Page 37: ......
Page 38: ......
Page 39: ...www martin com...
