Harman Martin ELP WW IP, User Manual

Page: 21 / 39

Martin® ELP WW IP User Manual 21
Calibration
From the SERVICE menu you can select CALIBRATION. This menu allows you to adjust the
overall brightness of the fixture to match with other fixtures. The fixture is calibrated in the factory
but over time the brightness of the LED emitters will gradually reduce, so this function can be
useful if you need to match a new fixture with older ones.

DIMMER sets the overall maximum brightness of the fixture.

WHITE (avai
lable from firmware v. 1.2) gives fine adjustment of the fixture’s color temperature.

LOAD DEF will load the factory-set calibration values. If you have replaced the factory-set
values with custom values using SAVE SET (see below) it will load the custom values.

SAVE SET replaces the factory-set DIMMER and WHITE values with any custom values that
have currently been set.
You must enter a password (019 by default) before you can access the SAVE SET menu item.
Important! The SAVE SET command permanently overwrites the factory-set calibration values. It
is not possible to restore the factory-set values by powering the fixture off and on, resetting the
fixture or uploading new firmware. Once you have saved custom calibration values using SAVE
SET, the only way to return to the original factory-set values is to re-adjust the DIMMER and
WHITE calibration settings back to their original values.