Harman JBL Professional VTX Series, Rigging Manual

Page: 57 / 77

57
VTX A
6 | Rigging Manual
12 - THE VTX A6 CEILING MOUNT
The VTX A6 CM Ceiling Mount accessory allows for a cost-effective way to suspend individual or small A6/B15 arrays from a capable
structure in a permanent installation scenario. The ceiling mount creates the lowest profile mounting solution making it a great choice
in situations where ceiling height is limited, such as underbalcony fill applications. The arrays are hand stacked from the top down, and
down angles are set from the hardware of the first cabinet.
STEPS:
• Use the included drilling template to mark the hole positions. Attach the brackets to the structure.
• Set the angle of the first A6 on the ground and pre-extend the rigging.
• Using the provided hardware, attach the first speaker to the brackets.
• Set the angle of the next A6 and attach to the first A6. Repeat step 4 until the array is complete.
1
2
3
4
CAUTION: It is the responsibility of the installer/user to ensure that the structure and hardware are sufficient and
rated for the exact use case and requirements . Any mechanical limits provided in this manual are strictly for the
brackets and nothing else .
2
1
3
4