47
VTX A
6
| Rigging Manual
STEPS (TIGHTLY WRAPPED BOTTOM SECTIONS):
• Raise the suspended cluster of A6 and B15 cabinets, then align the cart of A6s on the ground underneath the suspended
cluster.
• Carefully lower the suspended cluster until the front attachment points are nearly touching. Check that the attachment points
are aligned, then lower the suspended cluster until the front attachment points join. Insert the two front pins.
• Use the electric hoist to raise the array. Be aware that the lower cluster may swing forward slightly as it lifts off the ground.
• Once the array is off the ground, grab the lower cluster by the handle at the rear of the Road Case and gently pull back towards
the rear of the array. While doing this, lower the array so that the front wheels of the Road Case touch the ground. Continue
lowering the array until the rear attachment points engage. Insert the two rear QRPs.
• With all four QRPs secured, lift the array off the ground and remove the Road Case Bottom.
1
2
3
5
4
10.3 DE-RIGGING THE ARRAY
The steps to de-rig a mixed array are the same as for a standalone A6 array. Follow the steps in Chapter 9 – Disassembling Arrays to
safely de-rig the array.
Summary of Contents for JBL Professional VTX Series
