28
VTX A
6
| Rigging Manual
7.3 ATTACHING THE MINI FRAME TO AN A6 CABINET
STEPS:
• Set the top cabinet to 6º.
• Attach the two side arms to the top A6 cabinet. The pins should be installed from the outside of the Mini Frame.
• Attach the Spreader Bar to the side arms using the two Spreader Bar quick release pins.
1
2
3
CAUTION: Ensure that the two Spreader Bar pins are fully seated and engaged before suspending an array . Check
for correct installation by pulling on them . The QRPs should be fully seated with minimal movement .
CAUTION: Always make sure that the same hole position is used on both side arms . Failing to use the same position
on both sides can result in damaging the Mini Frame .
Summary of Contents for JBL Professional VTX Series
