Store New
:
1. To store a new setup, choose
Store New
after pressing the
store
button. Again, you must
name your new setup. After you are done, press
Store
once again. You now must choose a
place for the new setup to be placed in the setup library. The name of your new setup is dis-
played on the middle line of text (the “Parameter 2” spot).
2. Use the
Data Wheel
to scroll to the place where you want to the new setup added. As you
scroll, notice the names of the setups already in the library scrolling by on text lines 1 and 3
(parameter 1 and parameter 3). This indicates that you are placing your new setup between the
two setups displayed above and below your new one. The DDP “makes room” for your setup,
no matter where you want to place it.
3. Pressing
Store
once more saves the setup in the spot you chose, and after a brief pause, the
screen display the “Done!!” line and you have saved a setup, complete with all parameters,
ready to use next time.
Notice that as you write over an old setup, all other programs that recall that setup will now recall the
newly saved setup.
{{{{
||||
®
,,,,
yyyy
zzzz
22
Section 4: Editing / Saving / Recalling Programs
