Page 22
DCP-555 Installation Guide
Specifications
NETWORK
Connectors:
2 x RJ45 (Port A = AES67 and control, Port B = VoIP and control)
Maximum Cable Length:
100m/328ft on Category 5 cable between device and Ethernet switch
BLU LINK
Connectors:
2 x RJ45
Maximum Cable Length:
100m/328ft on Category 5e cable between devices
Maximum Number of Nodes:
60
Number of I/O Channels:
28x32
Supported Sample Rate:
48kHz
Latency:
11/Fs (0.23 ms @ 48kHz)
Pass-Through Latency:
4/Fs (0.08 ms @ 48kHz)
AES67
Connectors:
1 x RJ45 (Ethernet Port A)
Number of I/O Channels:
16x16
Max Number of Streams:
16
Supported Channels per Stream:
Up to 16
Supported Sample Rate:
48kHz
VOIP
Connectors:
1 x RJ45 (Ethernet Port B)
Number of Simultaneous Lines:
4
Supported Sample Rate:
48kHz
POWER/TEMPERATURE
Mains Voltage:
100 – 240VAC, ~50/60Hz
Power Consumption:
<65VA
Operating Temperature Range:
0º to 45º C (32º to 113º F)
PHYSICAL
Rack Space:
1U
Dimensions (H x W x D):
1.7” x 19” x 13” (43mm x 483mm x 330mm), width includes rack mounts
Weight:
9.4 lbs (4.3 kg)
Specifications subject to change without notice.
BSS Audio incorporates high-quality mechanical fans in some products. All mechanical fans have a limited life expectancy.
We recommend annual inspection of fans for dust occlusion and excessive noise. Fan assemblies should be replaced after
six to ten years of use. Environmental factors such as elevated temperature, dust, and smoke can adversely affect fan
life. Systems exposed to these conditions should be inspected more frequently. Fan replacement can be performed either
at the factory or by an experienced technician in the field. Please contact BSS Technical Support for more information
on purchasing replacement parts or product service. BSS Audio has a policy of continued product improvement and
accordingly reserves the right to change features and specifications without prior notice
