Chapter 3: NVR Web Interface Configuration Options
27
N6123 NVR User Manual
Playback Section
The
Playback
section of the
Settings
page is shown in
. Use this section to choose a recorded file stored on the NVR to
playback. Options are described in
FIG. 22
Playback Section
Record (using current settings) Section
The
Record
section of the
Settings
page is shown in
. Use this section to begin a recording using the currently assigned
stream settings. Options are described in
NOTE:
HDCP content cannot be converted. Encrypted N3000 streams cannot be converted. Unencrypted N3000 streams can be
converted to MP4 files only.
FIG. 23
Record Section
TABLE 6
Settings Page: Playback Section
Option
Description
Notes
Channels
Select which stream to use for recording playback.
The
Channels
options will not populate until a
Mode
is chosen. The number of streams listed
depends on which series is selected.
N1000
Mode
has one stream, while N2000 has
two, and N3000 has ten.
NOTE:
Mode is selected under NVR Setup on the
Settings page.
File
Choose a file from the drop-down selection of recordings
made on this NVR.
The
File
drop-down list displays
only the
recordings made in the currently selected Mode
.
For example, if
Mode
is set to
N1000
, then only
N1000 recordings appear in this list.
Loop
Enable this option to place the recording you are playing
back in a continuous loop (so it constantly repeats).
Start Playback
Begin playback of the chosen
File
.
If
Loop
is not enabled, then playback ends when
the recording does.
Stop Playback
End playback of the chosen
File
.
TABLE 7
Settings Page: Record Section
Option
Description
Notes
Channels
Select which channel to record from.
The
Channels
options will not populate until a
Mode
is chosen. The number of streams listed
depends on which series is selected.
N1000
Mode
has one stream, while N2000 has
two, and N3000 has ten.
NOTE:
Mode is selected under NVR Setup on the
Settings page.
Description
Enter a description for this recording.