Harman AMX NMX-ENC-N2151, Instruction Manual

Page: 50 / 66

Decoder Configuration Options
50
N2151/N2251 User Manual
Change Password Section
To change the N2251 Decoder interface password (for admin-level access) enter the current password in the field labeled Old
Password , and enter a new password in the New Password and Confirm Password fields. Click Change PW to accept the new
password.
FIG. 45
Change Password
NOTE: This password needs to match N-Able's stored password to allow auto-login using N-Able.
Software Section
The Software section of the Settings page is shown in Figure 46 . Options are described in Table 20 .
FIG. 46
Software Section
TABLE 20
Settings Page: Software Section
Option Description
Serial Displays the serial number of the N2251 Decoder.
MAC Address Displays the MAC address of the network interface of the N2251 Decoder.
Firmware Version Displays the date code for the currently running version of the N2251 Decoder internal firmware.
Web Version Displays the date code for the currently running version of the web interface.
Factory Restore Click to restore the device to the original factory settings. This resets everything except the IP address
(including name, stream number, serial settings, etc.).
Reboot Click to reboot the device (does not affect current configuration).