Decoder Configuration Options
45
N2151/N2251 User Manual
Mute
Enable to mute output audio.
Lineout Volume
This slider controls the output gain on the analog audio
output.
By default, this setting controls both the left and right
lineout channels. Click the
Set Left/Right
link to
control channels individually.
Enable HDMI Audio
Set HDMI audio to be disabled, enabled, or selected
automatically based on the source.
ON
forces audio on at all times.
OFF
disables audio
completely.
AUTO
reads the EDID of the connected
device to determine whether or not to send audio.
Advanced Settings
on page 46 for details on
the options available from this link.
RS232 Settings
on page 48 for details on the
options available from this link.
Allow SVSI Multicast
Disable this option to prevent the port from outputting
multicast video traffic.
Particularly useful if you are connecting a non-SVSI
device to a port for network-based control.
Disable P1
Completely disables the P1 port for all traffic.
Once disabled, anything connected to the P1 port will
no longer be available on the network.
Cancel
Click to return all controls to the last saved
configuration.
Save
Click to accept changes made to these controls.
TABLE 15
Settings Page: Decoder Setup Section (Cont.)
Option
Description
Notes
