Installing and Configuring Your AV Equipment
16
N2151/N2251 User Manual
FIG. 11
Video Matrix Page
5.
Double-click the Encoder’s name in the list. The
N-Series Encoder Login
). If prompted, use
the following default login credentials to log in for the first time. These can be changed later on the
Settings
page.
Default username:
admin
Default password:
password
FIG. 12
Login Page
NOTE:
The Login page is only displayed if N-Able's stored username/password does not match the unit's username/password. A
default system will match. The default password for N-Able can be modified under N-Able>Settings.
6.
The
Settings
page is displayed (see
).
7.
Change the
Stream
setting. We recommend setting
Stream
to a number between 2 and 254 (it is
required
that the number be
less than 32,512). Use the
P0
and
P1
check boxes to designate which port to send the stream over.
NOTE:
Uncompressed streams (880-4250 Mbps) are only supported on the P1 port. Compressed streams (200-600 Mbps) are
supported on either P0 or P1.
Encoders are listed across
the top of the page.
Decoders are listed down the
left side of the page.
Red Text
- No video source (Encoder) or no display (Decoder).
Red Exclamation Point (
!
) - N-Able cannot communicate with device.
Gray Text
- Video network transmit for this unit is disabled.
Black Text
- Unit is in live play mode.
Blue Text
- Unit is playing locally-stored content.
