Encoder Configuration Options
N2412A/N2422A User Manual
37
N-Act Page
Click the
N-Act
link at the top of any of the main web pages to access the page shown in
. This page allows you to create
command lists which are performed automatically by the unit based on power or video connection (without the use of an outside
controller). For example, you can tell a projector and lights to come on when the Encoder powers up. You can add multiple
for option descriptions.
FIG. 33
N-Act Page
TABLE 12
N-Act Page Options
Option
Description
Enable N-Act Events
Enable to activate the configured events.
Power on Event
Create/delete/test events to be performed when the Encoder powers on. Visit our website for more details on
Application Programming Interface (API) commands.
Video Cable Connected
Event
Create/delete/test events to be performed when the Encoder is connected to a video source. The
Trigger Delay
field specifies how long the device has to be connected for the command to be executed.
Video Cable
Disconnected Event
Create/delete/test events to be performed when the Encoder is disconnected from a video source. The
Trigger
Delay
field specifies how long the device has to be disconnected for the command to be executed. This keeps
accidental (momentary) disconnects from triggering the command sequence.
Generic Events
Create custom N-Act events. These can be based on most web page or status changes for the unit.
NOTE:
An Address of 127.0.0.1 basically means to perform the event to THIS unit (on which the N-Act
event is being configured).
Save Events
Click to save changes made to this page.
Import/Export
Use this section of the page to import/export N-Act event configurations. from one N-Series unit to other
N-Series units.
