a.
The N2300 Series Encoders and Decoders produce a frame payload larger than 1500 bytes. This requires the switch to
have the capacity of handling jumbo frames enabled.
6.
Quality of Service (QOS): Managing the delay, delay variation (jitter), bandwidth, and packet loss parameters on a network
becomes the secret to a successful end-to-end business solution.
a.
Not required for use with N-Series devices
b.
Policing
i.
A policer typically drops traffic.
ii.
Differentiated Services Code Point (DSCP) values can be configured in N-Series devices if QOS is required on the
network.
c.
Shaping
i.
A shaper typically delays excess traffic using a buffer, or queueing mechanism, to hold packets and shape the flow
when the data rate of the source is higher than expected.
ii.
Cannot be used with N2300 series.
7.
TCN Flood Off
a.
TCN (Topology Change Notification) flooding will cause unnecessary backplane and bandwidth usage when adding or
removing a device on the network, which can cause stream interruptions as the flooding sweeps through the network.
i.
Note that this command has to be assigned individually per port that is assigned to that VLAN. However it is not
necessary with ports on the same switch that will not be set up on the same VLAN as the N-Series devices.
b.
Command Example: NO IP IGMP SNOOPING TCN FLOOD
© 2020 Harman. All rights reserved. AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered trademarks of HARMAN.
Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
Last Revised:
2020-12
