MXA-MPL Modero X Series® Multi Preview Live
6
MXA-MP & MXA-MPL Instruction Manual
MXA-MPL Specifications (Cont.)
VIDEO
• Max Number of Active Video Streams: 1
• Video Preview Image Format: JPEG (accessed over HTTP)
• Max Number of Video Preview Images: 10
• Min Refresh Time of Preview Images: 2 sec per preview image
• Video Input: HDMI, DVI, RGBHV, S-Video, Composite or Component video
• Video Input Resolutions supported by Firmware v2.1.28 or higher:
HDMI: 640x480p@60Hz, 800x600p@60Hz, 1024x768p@60Hz, 1280x720p@60Hz
DVI: 640x480p@60Hz, 800x600p@60Hz, 1024x768p@60Hz, 1280x720p@60Hz
RGB/GRAPHICS: 640x480p@60Hz, 800x600p@60Hz, 1024x768p@60Hz, 1280x768p@60Hz
COMPONENT: 720x480i@60Hz, 720x480p@60Hz, 720x576i@50Hz, 720x576p@50Hz
SVIDEO: ntsc, pal-bghid, pal-m
COMPOSITE: ntsc, pal-bghid, pal-m
Note: When using the MXA-MPL for displaying live motion streams, make sure to use the
supported resolutions with the video input type. While the MXA-MPL is capable of supporting up
to 60 Hz, the Modero X display panels that use MXA-MPL only support 30 Hz.
• Video Input Resolutions supported by Firmware versions previous to v2.1.28:
HDMI/DVI: 640 x 480p @ 60 Hz, 800 x 600p @ 60 Hz, 1024 x 768p @ 60 Hz,1280 x 720p @ 60
Hz
PAL: 576i, 576p@50 Hz
NTSC: 480i, 480p@60 Hz
• Video Input Resolutions not supported:
1280 x 768p @ 60 Hz, 1920 x 1080p @ 60 Hz:
• Supported Video Codecs: MPEG-2-TS: H.264 High Profile@Layer 4, AAC-LC up to 720p at 25 fps
(decode)
• Video Output: Up to 720p@25 fps over IP (Matches input resolution)
COMMUNICATIONS
Ethernet: 10/100 port, RJ-45 connector with Ethernet/IP pass-through
AUDIO
Audio Input: Unbalanced 1/8th-inch mini-jack connector (for use with non-HDMI audio only)
FRONT PANEL COMPONENTS
• Power: (1) LED (green) lights when device is receiving power
• Status: (1) LED toggles on/off green every 5 seconds if communicating to the panel (i.e. the
panel is configured to use the MXA-MPL)
• Video Input: (1) LED (red) lights when receiving video signals
• LAN: (1) LED (green) lights when the LAN connection is enabled
• Panel: (1) LED (green) lights when device is connected to the panel
• Video Output: (1) LED (red) lights when sending a video stream to a touch panel
• Reset Button: Reboots the unit when pressed
• Factory Reset Button: Resets the unit to factory defaults when pressed for at least 5 seconds
REAR PANEL COMPONENTS
• DVI-I: DVI-I multi-format video input
• Diagnostics Output: HDMI diagnostics output (720p only)
• Analog Audio Jack: 1/8th-inch mini-jack input (for use with non-HDMI audio only)
• Power Output: 2-pin 3.5 mm Phoenix-style connector output, 12 Volts, 3 Amps
• Ethernet In: (1) 10/100 port, RJ-45 connector for connection to network
• Ethernet Out: (1) 10/100 port, RJ-45 connector for connection to touch panel
• Power: IEC power cord connector (100-240V AC, 47-63Hz)
ENVIRONMENTAL
• Temperature (Operating): 32° F to 104° F (0° C to 40° C)
• Temperature (Storage): 4° F to 140° F (-20° C to 60° C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation without Panel: 68 BTU/hr
• Power ("Heat") Dissipation with Panel: 170 BTU/hr
REGULATORY COMPLIANCE
• FCC Part 15 Class A
• CE EN 55022
• CE EN 55024
• CE EN 60065
• IEC 60065
• IC
• UL 60065
• RoHS
• WEEE
INCLUDED ACCESSORIES
• MXA-MP Installation Guide (93-5968-20)
• MIC AC Universal Power Cord (CA1090-131)
