background image

Troubleshooting Guide

20

This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So, if you have a problem,
first check this list for a possible solution. If the problem persists, consult your authorized Harman Kardon Service Center.

If the problem is...

Make sure that the...

No lights illuminate when POWER button is pressed

Unit is plugged into a live outlet
Main power switch is pressed in

No sound is heard

Unit has not been muted
Correct input function selector button has been pressed
Volume is turned up

No output from one or more channels

Cables are not defective: Check/replace speaker cables

Tuner sound has a large amount of interference, or

The antenna is properly connected

The “Stereo” display is not illuminated, or

The antenna is properly located

Tuner sound distorts and/or volume level is too low

The antenna is set in the proper direction
The antenna is adequate to receive the desired station

Tuner is intermittent or continuously buzzing or hissing

The unit is away from fluorescent lights, TVs, motors and 
other electrical appliances

HK3270 "U" om (B)  2/5/99  10:40 AM  Page 20

Summary of Contents for HK3270

























Reviews: