background image

Intr
oduction

1

Signature 2.0

Congratulations! With the purchase of a Harman

Kardon Signature Series product you are about to begin

many years of listening enjoyment. The Model 2.0

Processor/Tuner has been designed to provide all the

excitement and detail of motion picture soundtracks and

reproduce every subtle nuance of your favorite musical

selection. On-board Dolby* Digital and DTS

decoding

enables the 2.0 to deliver six channels of fully discrete

sound from the exciting new digital audio formats that

are a part of DVD and HDTV broadcasts. A wide selec-

tion of matrix decoding modes delivers full compatibility

with conventional Dolby Surround stereo and mono

programs. The 2.0 is also ready to accept future surround

systems through the use of six-channel direct inputs 

that accommodate optional outboard decoders for future

surround systems.

Mute

Tune

Surround

Source

  2.0 

Standby

On/Off

DVD              Vol

Dolby Digital     10

While complex digital circuits are hard at work within

the 2.0, a simple F menu system and learning remote

control make the unit easy to install and operate. 

In addition to selecting from a variety of audio/video

sources, the Signature 2.0 is equipped with the latest 

in tuner technology, including the RDS data system 

that automatically identifies FM stations transmitting

special data and provides information they transmit

about the station’s programming. The RDS system even

lets you automatically search for a station with a specific

program type from the participating stations in your

reception area.

To obtain maximum benefit from the Signature 2.0’s

many features we urge you to take a few minutes to read

through this manual. That will ensure that connections

to playback sources, power amplifiers and other external

devices are made properly. In addition, a few minutes

spent learning the functions for the various controls and

the meaning of the on-screen and front panel display 

messages will enable you to take advantage of all the 

power the Signature 2.0 is able to deliver.

Harman Kardon has been a part of the audio world 

since it invented the first high-fidelity receiver over forty-

five years ago. With the combination of state-of-the-art

circuitry and time honored design philosophies, the 

Signature 2.0 is one of the most innovative products 

ever offered by Harman Kardon. Should you have any

questions about this product, its operation or installation 

that are not answered in this manual please contact your

retailer or custom installer. They are your best source for 

product information. You may also contact Harman Kardon 

via the World Wide Web at www.harmankardon.com

The following are among the 2.0’s many features:

On-Board Dolby Digital and DTS Decoding

Multiple Coax and Optical Digital Inputs

Composite and S-Video Switching

Easy-To-Use On-Screen Menu Control System

FM Stereo/AM Tuner With RDS Data System 

and 30 Presets

Learning Remote Control Pre-Programmed With

Harman Kardon and RC-5 Control Codes

Trigger Output For Automatic Control of Signature

Series Power Amplifiers

RS-232 Control Port For Connection To External

Automation Systems

Six-Channel Direct Inputs For Use With External

Audio Adapters or Decoders.

Summary of Contents for HA160-0004-A









































































Reviews: