12
BDT 3/BDT 30
Setting Up the Player
Settings Menus
Pressing the remote’s settings button displays the BdT player’s settings menus, which
allow you to configure the player’s functions. use the remote’s cursor left/Right buttons
to change from one menu to another, use the cursor up/down buttons to navigate
through the lists that appear on the various screens, and use the Ok button to select
highlighted items. Press the exit button at any time to return to the previous screen.
Select to adjust general settings
System
Language
Playback
Parental Control
Network
General Settings
General Settings
Select to adjust system settings
System
Language
Playback
Parental Control
Network
Front Panel Brightness
Screen Saver
Auto Power Off
CEC
One Touch Play
One Touch Standby
100%
Off
Off
On
On
On
General Settings
System:
The system option allows you to set the following system features:
•
Front Panel Brightness:
This option sets the brightness of the BdT 3/BdT 30’s
information display.
•
screen saver:
To prevent image burn-in, we recommended activating the screen
saver when using the BdT 3/BdT 30 with a cRT or plasma Tv.
•
Auto Power Off:
This option sets the amount of time the BdT 3/BdT 30 remains on
while idle until it automatically enters the standby mode.
•
CEC:
When this option is set to On, you can enable or disable the cec One Touch
Play and One Touch standby functions.
•
One Touch Play and One Touch standby:
When these options are set to On, the
BdT 3/BdT 30 can be placed into the Play or standby modes upon commands
from the remote control of a Tv connected to the player’s hdMI Output connector.
•
system Upgrade:
select this option when you want to install a firmware upgrade
for your BdT 3/BdT 30 that you’ve downloaded from a harman kardon source.
•
setup Wizard:
This option activates the BdT 3/BdT 30’s setup Wizard (see
Setup
Wizard
, on page 11).
•
BD-live storage:
This option lets you set up how the BdT 3/BdT 30 will
handle stored Bd-live content. you can choose to store the content on a usB
memory device via the BdT 3/BdT 30’s usB port. see
BD-Live Interactivity
, on
page 15, for more information.
•
Restore Defaults:
This option restores the BdT 3/BdT 30 to its factory default
setting values. NOTe: This option will also reset the parental-control password
back to the factory default of 0000. see
Parental Control
, on this page.
Language:
This setting lets you set the language for the disc player and the disc menus,
the preferred audio language and the preferred subtitle language.
• NOTe: If the selected language is not available on the particular disc being played,
use the disc’s menu to select the language from those available on the disc.
Playback:
The Playback option allows you to set the following disc playback features:
•
show Angle icon:
This option lets you select whether or not the angle icon will
automatically be displayed when a disc with multiple camera angles is played.
•
Auto Play:
This option lets you select whether discs will automatically begin
playing when they are loaded into the player.
•
show PiP icon:
This option lets you select whether or not the picture-in-picture
icon will automatically be displayed when you play a Blu-ray disc recording with
picture-in-picture content.
•
show secondary Audio icon:
This option lets you select whether or not the
secondary Audio icon will automatically be displayed when you play a Blu-ray disc
recording with secondary audio content.
•
Disc Resume:
This option lets you select whether or not a disc that has been
ejected while playing will resume play from that location the next time it is inserted
into the disc player. NOTe: This feature is disc-dependent. Not all discs support
disc resume.
•
DivX
®
VOD DRM:
This option displays your player’s divX registration information.
Parental Control:
This option lets you set the player’s parental-control password and the
level of parental control you want active. NOTe: The default password is 0000.
Network:
This option allows you to set the following network features:
•
information:
This option displays your network’s IP, subnet mask, gateway and
dNs addresses.
•
Test Connection:
This option tests for a proper network connection to the BdT 3/
BdT 30.
•
iP Configuration:
This option lets you enter your network settings, either
automatically or manually. unless your network administrator instructs you
otherwise, you should use the Auto option.
•
BD-live Connection:
This option lets you set the BdT 3/BdT 30’s Bd-live
connection preferences. “Always Allow” always allows downloading of Bd-live
content. “limit” allows content downloading only if the disc is officially Bd-live
certified. “Prohibited” does not allow any Bd-live access. see
BD-Live Interactivity,
on page 15, for more information.
•
Proxy setting:
“enabled” allows you to select and set the Proxy host and Proxy
Port if your network requires a proxy setting. “disabled” bypasses any Proxy host
and Proxy Port settings and prevents their selection. This option is for advanced
users only and in most cases should be left set to “disabled.”
