Harman Kardon AVR 525, Owner'S Manual

Page: 33 / 60

OPERATION 33
OPERATION OPERATION
The channel output for any input may also be adjusted
using the full-OSD on-screen menu system. First, set
the volume to a comfortable listening level using the
Volume Control ı
î
. Then, press the OSD
Button
v
to bring up the
MASTER MENU
(Figure 1). Press the ¤ Button
n
until the on-
screen
›
cursor is next to the
CHANNEL
ADJUST
line. Press the Set Button
p
to
activate the
CHANNEL ADJUST
menu.
Once the menu appears on your video screen, first
use the
⁄ / ¤ Buttons
n
to move the on-screen
› cursor so that it is next to the
TEST TONE
line. Press the
‹
/
›
Buttons
o
so that
OFF
is highlighted. This will turn off the test tone and allow
you to use your external test disc or other source
material as the reference. Then, use the
⁄ / ¤
Buttons
n
to select the channels to be adjusted.
At each channel position, use the ‹ / › Buttons
o
to change the output level. Remember, the
goal is to have the output level at each channel be
equal when heard at the listening position.
If you wish to reset all the levels to their original factory
default of 0dB offset, press the
⁄ / ¤ Buttons
n
so that the on-screen cursor is next to the
CHAN-
NEL RESET
line and press the ‹ / › Buttons
o
so that the word
ON
is highlighted. After
the levels are reset, resume the procedure outlined
above to reset the levels to the desired settings. When
all adjustments are done, press the
⁄ / ¤ Buttons
n
to move the on-screen
›
cursor so that it is next
to BACK TO MASTER MENU and then
press the Set Button
p
if you wish to go back to
the main menu to make other adjustments. If you have
no other adjustments to make, press the
OSD Button
v
to exit the menu system.
NOTE: The output levels may be separately trimmed for
each digital and analog surround mode. If you wish to
have different trim levels for a specific mode, select that
mode and then follow the instructions in the steps shown
earlier.
Memory Backup
This product is equipped with a memory backup sys-
tem that preserves the system configuration information
and tuner presets if the unit is accidentally unplugged
or subjected to a power outage. This memory will last
for approximately two weeks, after which time all infor-
mation must be reentered.
37
37
37
40