Harman Kardon AVR 2600, Service Manual

Page: 119 / 229

FLI30336 Feature attributes
3/7
2 Feature attributes
● Flexible digital and analog capture
– 16 configurable analog inputs
– Direct connection from tuner or connector to analog input pin
– Supports analog RGB/YUV capture up to 162 MHz and digital input capture up to
165 MHz
– Full SCART support including RGB fast blank
– 4:4:4/4:2:2/CCIR656/601 8/16/24/30-bit digital input port
– Simple connection to JPEG and MPEG processors with a 8-bit bi-directional
media port
● Integrated 3D video decoder
– Faroudja IntelliComb™ technology
– 3D adaptive comb filters for luma–chroma separation
– Supports Composite, S-Video, and Component (including High Definition) video
input signals
– Supports all broadcast TV video standards—NTSC (North America and Japan),
PAL (I, B, G, H, M, D, N), SECAM (D, K, L, B, G)
– Supports playback video standards—NTSC443 and PAL-60
– Macrovision
TM
and VCR trick mode support
● VBI signal processing
– Multi-standard digital VBI dataslicer
– WST FastText page support access with > 2048 page cache
– Supports WST level 2.5
– V-chip, VPS, Closed Captioning, XDS, CGMS, and WSS decoder
– Supports VBI frame freeze
● Faroudja DCDI Cinema format conversion
– Low angle de-interlacing processing
– Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format
– Format conversion up to WUXGA resolutions
– Panoramic and anamorphic non-linear scaling
– Adaptive media display processing for 3:2 and 2:2 video content
– Special 2:2 and 3:3 film mode for improved film processing
– Adaptive 3D/TNR noise reduction
– Media noise reduction for MPEG inputs
●
On-chip microprocessor
– Integrated x186-based microprocessor with rich function library
– General Purpose Inputs/Outputs (GPIOs) available for managing system devices
(keypad, backlight, NVRAM, etc.)
– Advanced power control for low power stand-by mode
– 2-wire serial master bus interface for external device control
AVR3600
harman/kardon
119