Harken R27LS, Instruction Manual, Page: 8 / 86

8 ENGLISH 26/01/22
Bent rail with radius between 2.75m and 15m (valid for all trolleys)
For bending radius included between 2,75m and 15m in all the three direction, it's possible to require the bending
rail to Harken. The bent rail has 250mm of straight rail at the extremity due to the production process.
For more information contact Harken. See paragraph Installation Layout – bent rail 1, 2 and 3.
Bent rails at 90° (valid for trolleys INCAR1-CURVE, INCAR1-CURVE (BLACK), INCAR2-CURVE, INCAR2-
CURVE (BLACK), INCAR-360)
The rails INR27-CURVE FLAT.LS, INR27-CURVE CONVEX.LS and INR27-CURVE CONCAVE.LS have a bend radius
of 90° and can only be used with the trolleys INCAR1-CURVE, INCAR1-CURVE (BLACK), INCAR2-CURVE,
INCAR2-CURVE (BLACK) and INCAR-360. These rails also have a straight section of 250mm at the ends.
For angles other than 90 °, the rail can be cut and the brackets INBRKT.2, INBRKT.3 or INBRKT.4 can be installed
at a distance of 100±10mm on both ends. For installation with INBRKT.1, contact assistance Harken.
COMPATIBILITY CURVED TROLLEYS-TRACKS
Bent rails
Trolley
15m 2.75 ÷ 15m
INR27-CURVE
FLAT.LS
INR27-CURVE
CONVEX.LS
INR27-CURVE
CONCAVE.LS
IN9606
IN9606.CLEAR
IN9608
IN9608.CLEAR
IN9565
IN9565.CLEAR
IN158
IN158.CLEAR
INCAR1-CURVE
INCAR1-CURVE (BLACK)
INCAR2-CURVE
INCAR2-CURVE (BLACK)
INCAR-360