Harken R27LS, Instruction Manual, Page: 32 / 86

32 ENGLISH 26/01/22
END STOP assembly instructions
Recommended end fitting
Stainless steel fixed end fitting
The end fitting must be fastened using the 2 M6 self-
tapping screws supplied into the related holes (12 Nm
tightening torque).
INSTOP.LS
Opening aluminium endstop. The enstop must be fixed with the 2 self-tapping M6
screws supplied, in the appropriate holes (tightening
torque 12 Nm). Place the fixing clip inside the hole on
the stop pin.
INSTOP-OPEN.LS
WARNING!
Always make sure that the fixing clip is positioned correctly.
Failure to use the retaining clip can cause a fall, which can result in serious injury or death.