Harken R27LS, Instruction Manual, Page: 10 / 86

10 ENGLISH 26/01/22
Turntables
Connectors
Stainless steel “unsupported” connector, to
connect a rail to the adjacent one.
Alignment pin (two
alignment pins are
required to connect the
rail).
Extruded aluminium connector, to be used with
extruded brackets if it is possible to fasten it to
the structure (otherwise, the stainless steel
“unsupported” connector must be used).
L (90°) Turntable. It permits to realize a continuous line
with direction changes of right angle (90°).
T (90° - 180°) Turntable. It permits a three ways
intersection (0° - 90° - 180°).
INLINK.LS INLINK.AL
INTURN1.LS INTURN2.LS
INPIN.LS
INMID-ENTRY1.LS INMID-ENTRY3.LS
Connector to be used with
aluminium extruded brackets.
Allows the insertion of the trolley
along the line.
Connector to be used with
stainless steel brackets. Allows
the insertion of the trolley along
the line.