Rev.#0
17
13.
Installation
WARNING!
Before installation, ensure the following requirements are respected:
-
In deciding where to install the winch make sure that the rope is not parallel to the base of the
winch to avoid line overrides around the drum, which could seriously damage the winch and/or
put the crew in danger.
NOTE!
The correct entry line angle is: 6° (±2°).
WARNING!
Situation to avoid: incorrect entry angle for the rope of more than 6°.
Beware of the rope chafing on the base of the winch.
CORRECT!
INCORRECT!
Summary of Contents for Air 250
