13
STEP 12
Locate:
2 x Grid Tracks (13), 1 x Wood Chip Box
Rack(9), 1 x Wood Chip Box(10) and 1 x Wood chip
box lid(11).
Tools Needed:
None
Procedure:
•
Install one Grid Track (13) in each of the bottom
holes located in the grid support for both the
left and the right hand sides of the cabinet.
•
The wood Chip Box Rack(9) can be slide into the
Grid Tracks(13).
•
The wood chip box (10) sits in this rack over the
burner and the wood chip box lid (11) fits on top
of this.
STEP 11
Locate:
1 x Temperature Gauge, 1 x washer and 1 x
wing nut. (please note that the washer and wing nut
are already attached to the temperature gauge).
Tools Needed:
None
Procedure:
•
Attach the temperature gauge through the hole
in the middle of the upper door.
•
Secure with washer and wing nut from the
inside of the door.
STEP 10
Locate:
Door Latch Plate (17) and 4 x 10-24x1/2”
Screws.
Tools Needed:
Phillips head screwdriver
Procedure:
•
Attach each door latch plate (17) to the upper
and lower doors using 2 x 10-24x1/2” screws.
Each latch plate is fastened to the side of the
doors using two screws. Please note that each
door has one latch plate.
8
HK0522 2 Door Gas Smoker-Manual_v45.indd 13
15
/
4
/1
9
2:40 pm