HARGASSNER Classic 12, Operation Manual

Page: 28 / 64

28
HARGASSNER Heating technology for
Biomass
A 4952 Weng OÖ Tel.: +43/7723/5274-0 Fax: +43/7723/5274-5 office@hargassner.at
III
8 Settings menu
Press the Set button in the standard display to access the
Settings menu.
• Customer
• Installer
• Service
• Setup
8.1 Customer
This button leads to configuration pages, which are also
available via the Standard menu

See „Settings menu“ on page 31 .
8.2 Installer
Extended settings of the boiler. Only available for the registered installer and
Hargassner service personnel. The parametrisation depends on the heating
system configuration.
Code: 33

See „Installer settings“ on page 37.
8.3 Service
Enables trained service personnel to change parameters. The parametrisation
depends on the heating system configuration.
Note: Installer and Service menu are protected by a PIN code. Only service
personnel may change them, as the parameters may impair the functionality of
the heating system if poorly selected.
8.4 Setup
The following setting options are available:
• Display settings
• Network settings
• Parameter download (SD)
• Data recording (SD)
8.4.1 Display settings
No. 01 Display standby

Activates or deactivates the standby mode.
No. 01a Display settings

Display switches to standby mode after preset time
Display settings
Mo, 15/10/18 Setup HARGASSNER
Settings Standard
Auto
Function
Network settings
Parameter download (SD)
Data recording (SD)
HARGASSNER
Do,22.11.18 08:41
Customer
Installer
Service
Setup
HARGASSNER
Do,22.11.18 08:41
Display settings
Data recording
SD
Network
Parameter download
SD
HARGASSNER
Do,22.11.18 08:41
AUTO
DISABLED
Acc. Status
No. 01 Display standby
HARGASSNER
Do,22.11.18 08:41
No. 01a Display settings
Display standby for
Default: 10 min.
10 Min