For “Bus ID” give number 1 for charging connector 1 and “Bus ID 2” for charging connector
2, if available in your variant. If not, leave blank and continue by pressing “proceed”.
measurement via current transformer:
Only activate “measurement via current transformer” when a current transformer is
installed. This usually is only the case when the house connection exceeds 63 A
If an
eCB1 LR MP+
has already been installed and this setting has already been chosen
for the first device during the earlier described configuration process (see page 8), it is not
necessary to activate it again.
Configuration manual
eCB1
Smartmeter
Version: 1.2.1
20
