Setup of direct LAN connection to the eCB1
Step 1:
Install eCB1 (if included externally) and/or connect it to the power supply.
Step 2
: Integrate the eCB1 in your network, a PC or a laptop with help of a LAN cable
(see image).
Please Note
: Please make sure that only one unfigured eCB1 is connected to your network in order to
avoid name collisions.
1. Start your browser.
2. Type in the following URL „
“ (see image below).
1. The user interface of the eCB1
opens
.
Configuration manual
eCB1
Smartmeter
Version: 1.2.1
5
