Hardi RANGER PRO, Instruction Book

Page: 38 / 76

5 - Operation
5.8
WARNING! Always clean the sprayer carefully and immediately after use.
WARNING! Only mix chemicals in the tank according to directions given by the chemical manufacturer.
WARNING! Always clean the sprayer before changing to another chemical.
WARNING! Be careful not to slip or splash chemicals when carrying chemicals up to the tank lid!
The chemicals are filled through the tank lid - Note instructions on the chemical container!
1. Make sure the control unit is switched off.
2. Turn the bottom Suction Manifold valve handle towards “Suction
from main tank”. Turn the top Pressure Manifold valve handle
towards “Spraying” and the bottom Pressure Manifold valve towards
“Agitation”.
3. Engage pump and set to operating r.p.m. (540 r.p.m.).
4. Add the chemicals through the main tank hole.
5. When the spray liquid is well mixed, keep P.T.O. engaged so the
spray liquid is continuously agitated until it has been sprayed on the
crop.
Filling chemicals through tank lid