Hardi NAVIGATOR 3000, Operator'S Manual, Page: 67 / 122

5 - Operation
65
Operating the TurboFiller
The TurboFiller is where you add the chemicals to be mixed with water in the main tank.
Capacity: approximately 9 gallons (35 liters).
Before use
• Pull the locking lever (A) down to unlock the position of the
TurboFiller.
• Grab the handle (B) and pull the TurboFiller downwards.
• Lower the TurboFiller to the stop and let go of the locking lever (A)
to lock the position.
• Lift off the lid (C) and place it at the handle in front of the hopper
(D) (See paragraph “After use” on page 66).
• Place the chemicals for the coming spray job nearby, ready to be
filled into the TurboFiller.
Below is a short description on how to operate the valves by using the levers on the side of the TurboFiller.
For more details, see the following sections in this instruction book about the procedure for operating the TurboFiller while
filling chemicals.
TurboFiller Suction Valve
The valve is used simultaneously with the TurboFiller. The valve has 2
settings:
1. Push the valve lever down to get a quick suction out of the hopper.
2. Pull the lever to lock it in the open position for continuous suction
from the hopper into the main tank.
Open the valve by pulling the lever up when chemicals are to be filled
into the TurboFiller and transferred to main tank.
TurboDeflector Valve
This TurboDeflector valve activates the vortex flushing of the TurboFiller.
The valve has 2 settings:
1. Push the valve lever down to get a quick flush in the hopper.
2. Pull the lever to lock it in the open position for continuous liquid
rotation in the hopper.
Chemical Container Rinsing Lever
The upper lever is used for two purposes:
1. When the TurboFiller lid is open:
For rinsing empty containers. Place the container over the rotating
rinsing nozzle in the middle of the TurboFiller to rinse the inside of
the container.
2. When the TurboFiller lid is closed:
Use the Chemical Container Rinsing lever to rinse the hopper
when the filling of chemicals is completed.
€
DANGER! Do not press the lever unless the multi-hole nozzle is covered by a container or the TurboFiller lid is closed
to avoid spray liquid hitting the operator.