Hardi NAVIGATOR 3000, Operator'S Manual, Page: 60 / 122

5 - Operation
58
Boom Tilt Function
The following boom tilt function controls enables you to adjust the
boom height individually in the right and left hand side.
Boom tilt is adjusted by pushing the buttons (A), (B), (C) and (D) on the
grip control.
˜
ATTENTION! Applicable for ISOBUS, HC 8600 and HC 9600.
Night Spraying Light (Platform mounted lights)
The 2 boom flood light lamps (A) are mounted to the railing of the
platform (one at each side) and are positioned to illuminate both boom
wings. The work light lamp (B) is also mounted to the railing of the
platform above the valves. This lamp is positioned to light the HARDI®
TurboFiller and the valve system.
Work light selector switch
The boom and work lights selector switch is placed inside the
SafetyLocker (behind door) and has three positions:
1. Boom lights ON
2. Lights OFF (neutral position)
3. Work light ON
˜
ATTENTION! If the lights do not function, check the cable
connections and check if the fuses are blown. See “Electrical Schematic for Boom and Work Lights (SPB/SPC Booms)”
on page 109.
˜
ATTENTION! If preferred, the work lights can be controlled from the tractor cabin. Connect from J4 in the work lights
junction box to the optional function on the spray control unit.
˜
ATTENTION! Turn OFF all boom and work lights when driving on public roads!
˜
ATTENTION! Check frequently that the lights are clean and without damage. Clean with a dry cloth if needed. Replace
if broken.
A
B
E
I
H
C
F
G
D
1 2 3