Hardi mercury, Operator'S Manual

Page: 22 / 56

mercury
20 HARDI ® MERCURY OPERATOR'S MANUAL
To fi ll the tank with water, remove the lid found on top
of the tank; there are two lids located at the back of the
tank for easy fi lling from either side of the sprayer.
Always use water as clean as pos sible.
Always fi ll the tank with the fi l ter basket cor rectly in place
to prevent impurities from en tering the tank.
Setting up
Main tank
A
B
2
1
1
2
Filling Emptying
WARNING. Do not place the fi lling hose inside the tank. Keep it out of the tank at all times
and only point it towards the inside. If the hose were inside the tank and the pressure from
the water supply point dropped, the chemical products could be siphoned from the tank to
the water supply, contaminating the water therein .
A
To empty the tank with the drain valve, pull the red handle located on the upper left-hand side. The
valve is spring-loaded to return it to the closed position, but can be kept open by pulling the string
out and upwards into the V-shaped slot . To close the drain valve again, pull the red handle
down and release . The valve will close automatically .
B