Hardi MEGA VPZ MASTER, Original Instruction Book

Page: 166 / 178

8 - Technical Specifications
166
Transmission Shaft
Options at the tractor hitch point:
1.
Yoke with 6 splines.
Normally used for pump working speed = 540 rpm.
2.
Yoke with 21 splines.
Normally used for pump working speed = 1000 rpm.
The tractor must follow the international standard ISO 500-1:2014
regarding general specifications, safety requirements, dimensions for
master shield and clearance zone for rear-mounted power take-off types
1, 2, 3 and 4 on agricultural tractors.
Temperature and Pressure Ranges
Spray Liquid System
Technical Residue
Residue in the dilutable volume is mentioned in the table below.
The non-dilutable volume varies depending on the boom width and installed options in the fluid system.
Airborne Noise Emission
Airborne noise emission from operating the sprayer relates to the two defined operator positions (in the tractor cab or
operating the chemical incorporator/filling device/TurboFiller). Reference measurements indicate only in the latter case
(operating the chemical filling device) a contribution from the sprayer of additionally 4 dB(A).
Dimension: 1 3/8” (35 mm)
Operating temperature range 2 - 40 °C
Operating pressure for the safety valve 15 bar ± 1 bar
Max. pressure on the pressure manifold 20 bar
Max. pressure on the suction manifold 1.5 bar
Sprayer combination Dilutable volume for tank and fluid system
Main tank: 1200 litres
Boom width: 28 meters
40 litres
A