Hardi HC5500, Instruction Book

Page: 27 / 80

5 - Menu 1 Daily settings
27
Menu 1.1 Volume rate
How to change the volume rate
The volume rate can be changed by:
1.
Setting the desired rate in the Controller.
2.
Manually raising or lowering the pressure via the Spray Box.
3.
In the menu: Pressing or to apply over or under in a
preset percentage, e.g. 10% (the 3rd line indicates when this is
active) or
4.
When working (working screen): Pressing or to change
to one of 3 preset volume rates.
When having a mistblower, see chapter 10 for more details about spraying with UCR.
To read the Volume rate
Shortcut
Press and hold until menu [1.1 VOLUME RATE] is shown.
To change volume rate
Move cursor with or to the value to be changed.
Use or to change the value.
Press to confirm.
Press and hold to exit the menu system.
If the volume rate is set up with 3 programmable rates, there are three possibilities to enter volume rate.
[1.1.1 Rate 1](Default)
[1.1.2 Rate 2]
[1.1.3 Rate 3]
Manual dosage
To dose in manual mode, use the pressure switch on the Spray Box. The manual mode is indicated by the symbol at the
top of the display.
To go from manual to preset volume rate, press .
μ
ATTENTION! Under 0.5 km/h, the Controller will not regulate automatically.
1.1
VOLUME RATE
XXXXL/ha
5 - Menu 1 Daily settings