Hardi ARROW 2000, Instruction Book

Page: 40 / 84

4 - Starting up
38
Connections
General information
If your equipment includes an electrical component, please note the
following information to correctly connect the equipment and to
prevent problems when working.
The voltage required by the electrical components is 12 V. Before
connecting any component, make sure that the polarity is correct.
• Red wire = 12 V (+ positive)
• Black wire = (- negative)
The connectors assembled on the electric components comply with the standards for the majority of modern tractors. If
your tractor has another type of power supply connector, the supplied connector will need to be removed and adapted to
the tractor connector.
EVC/2 operating unit
Find a place in the tractor cabin where the control box can be fitted for
comfortable handling. It is recommended that you place it to the right
of the driver’s seat.
μ
ATTENTION! The control box must be properly attached to
prevent it from being hit or excessive vibrations.
The connector type is universal and it should be able to be connected
to any tractor.
As an emergency solution, remove the connector and splice the wires
directly to the battery.
±
WARNING! Always remember: Red wire (+) Black wire (-)
HARDI
ON ON
1
2
A
B B
C