manualshive.com logo in svg

Hardi ARROW 2000, Instruction Book

Share
Download
Hardi ARROW 2000 Instruction Book Download Page 32

3 - Description

30

B20 and B30 booms

Either a pneumatic or hydro-pneumatic system can be fitted. The 
structure is the same in both assemblies. The B20 boom has been 
designed to treat two complete rows and the B30 for two or three 
complete rows.

Do not walk or stand underneath or beside the machine when 
manoeuvring the booms.

B40 boom

Either a pneumatic or hydropneumatic system can be fitted. The B40 
boom includes a shock absorber system using quadrangle and spring 
links. It is designed to treat two or three complete rows. It includes an 
individual hydraulic lifting system on each boom.

Do not walk or stand underneath or beside the machine when 
manoeuvring the booms.

B50 and B51 boom

The B50 and B51 are available as Y- and Z-versions.

The Y-version has hydraulic lift and folding. This requires three double-acting outlets (two for folding and one for lift).

The Z-version are equipped with open centre hydraulics feature and requires one double acting outlet and is controlled via 
an electric remote control box from the tractor cabin.

The B51Z-version has a trapeze-suspended boom and individual tilt function RH and LH sides.

Pneumatic spray system

The pneumatic system is low pressure. This system takes advantage of the high air speed in the spout outlet to break the 
spray liquid and give a very fine mist together with turbulence. Using the deflectors at the spout outlet, the mist means that 
the liquid is distributed uniformly.

There are four spout models, which can be combined according to the 
bar type and assembly requested for the machine:

A.

Cannon with 1 atomizer

B.

Spout with 2 atomizers

C.

Spout with 3 atomizers

D.

Spout with 4 atomizers 

The Paraflow pneumatic system is low pressure. This system takes 
advantage of the high air speed at the pipe outlet to break the spray 
liquid and give a very fine mist together with turbulence. Using the 
deflectors at the tube outlet, the mist means that the liquid is distributed 
uniformly.

Summary of Contents for ARROW 2000





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands