Harbor Freight Tools Vulcan Migmax 215 Owner'S Manual & Safety Instructions Download

Page: 48 / 64

Page 16

For technical questions, please call 1-888-380-0318.

Item 63617

SAFETY

MAINTENANCE

BASIC WELDING

WELDING TIPS

SETUP

Front Panel Controls

Voltage

Input / Thermal Overload

Indicator:

Lights up if the input voltage is outside the
machine’s specifications or duty cycle has been
exceeded, resulting in overheating the Welder.

Power ON Indicator:

When illuminated

indicates that the Power Switch is on.

Material

Thickness / Voltage Knob

This

controls the output voltage of the Welder.

Synergic Indicator:

Lights when using Auto Settings

and flashes if chosen settings are incorrect.

Power Switch:

Turns on power to the

Welder and internal cooling fan.

MIG

Gun / Spool Gun Cable Socket

The MIG Gun

and Spool Gun Cables connect here. The wire,
welding current, and shielding gas (if performing
MIG) feed to the weld through here.

Wire Feed Control Socket:

The MIG Gun and

Spool Gun Control Cables connect here.

Ground Cable:

This connects to the base

metal to provide a good connection for the
current to travel back to the Welder.

Spool Gun Gas Outlet:

When using optional Spool

Gun (sold separately), gas hose connects here.

Wire Diameter Selection Knob:

Sets the

diameter of the welding wire to be used.

Wire Speed Knob:

Controls the speed that the

welding wire feeds out of the MIG Gun or Spool
Gun and the output amperage of the Welder.

Process Selection Knob:

Adjust to select

the welding process to be used.

Wire Speed

Knob

Wire Diameter

Selection Knob

Process

Selection Knob

Material

Thickness /

Voltage Knob

Wire Feed

Control Socket

Ground

Cable

Power

Switch

Voltage

Input /

Thermal

Overload

Indicator

Power ON

Indicator

Spool Gun

Gas Outlet

MIG Gun /

Spool Gun

Cable Socket

Synergic

Indicator

Summary of Contents for Vulcan Migmax 215

































































Search results

Summary of Contents for Vulcan Migmax 215

Reviews:

Related manuals for Vulcan Migmax 215

Brands by name

Popular brands

Harbor Freight Tools Vulcan Migmax 215, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for Vulcan Migmax 215

Reviews:

Related manuals for Vulcan Migmax 215

Brands by name

Popular brands