![background image](http://html1.mh-extra.com/html/harbor-freight-tools/drummond-63320/drummond-63320_owners-manual-and-safety-instructions_596969005.webp)
Page 5
For technical questions, please call 1-888-866-5797.
Item 63320
Installation
The pump must be installed in a stationary position with either:
a. A fixed pipeline or
b. A flexible hose pipe.
Please note!
1. Do not install the pump by suspending it
unsupported from its delivery pipe or power cord.
The pump must be suspended from the handle
or be placed on the bottom of the basin.
To ensure that the pump works properly, keep the
bottom free from sludge and dirt of all kinds.
2. If the water level sinks too low, any sludge in the
basin will dry out and stop the pump from starting.
To help ensure the pump will start as required,
check the pump regularly with start-up tests.
Power Supply
1. The pump is equipped with a shock-proof plug
according to regulations. The pump is designed to be
connected to 120 VAC, 60 Hz GFCI protected socket.
2. Make sure that the socket is sufficiently
secured and is in excellent condition.
3. When the plug is inserted into the socket,
the pump will be on standby.
4.
WARNING: To prevent death from electric
shock, pump must be connected only to
a GFCI protected outlet.
WARNING! TO PREVENT SERIOUS INJURY:
If the power cord or plug is damaged, do not
use the pump. The power cord or plug may
only be repaired by a certified electrician.
Areas of use
1. This pump is designed to pump water only.
2. This pump is designed to be used for:
Irrigation systems, lawn sprinkling,
and clear water transfer.
3. This pump should NOT be used for:
Continuous run, fountain/pond water features.
Water with dirt and debris. Removing water from
swimming pools or spas. Septic or sewage systems.
4. This pump can also be used to transfer water
(e.g. household, farming, plumbing).