Page 10
For technical questions, please call 1-888-866-5797.
Item 91062
SaFEty
OpEra
tiOn
MaintEnancE
SEtup
9. Place a straight edge or straight piece of wood
along one of the side surfaces of the Front and
Rear Base Plates. Slide the Knife against the
straight edge or piece of wood so that it aligns
evenly with both Base Plates. See
Figure D:
.
(Bottom view)
Straight
piece of
wood
Knife
Drum
Front Base
plate
rear Base
plate
align Knife
against
piece of
wood
Figure D:
10. Turn the three Knife Holder Bolts in the direction
shown in
Figure E:
to secure the Knife Holder
assembly in place.
Only snug the Bolts for now.
turn Bolts this
way to secure
Knife Holder.
Figure E:
11. Adjust the Knife so that both ends are level:
a. Set the Depth Knob to “0”.
b. Have an assistant hold a straightedge
(sold separately) against the bottom
of the Rear Base Plate.
c. Locate the Set Screws (33) on the
Knife Holder. See
Figure F:
.
Set Screws
(33)
Figure F:
d. Adjust one Set Screw until the Knife just touches
the straightedge on that side - see
Figure G:
.
Straightedge
(sold separately)
Knife
Knife
rear Base
rear Base
plate
plate
Figure G:
e. Adjust the other Set Screw until the Knife just
touches the straightedge on that side as well.
12. Turn the three Knife Holder Bolts firmly
in the direction shown in
Figure E:
to secure the Knife in place.
13. Rotate the Knife Drum 180° and change/
replace and adjust the other Knife
according to Steps 1 - 12, above.
14.
iMpOrtant!
Carefully double-check that
the Knives and Knife Holders are secure and
that both Knives are level before use.
