background image

Page 6

For technical questions, please call 1-800-444-3353.

SKU 02628 

        

REV 03l, 06l, 09k, 10g, 11a

Operation

Warning:  Hanging and dismounting of bicycles should only be done by adults who are 

physically capable of safely handling and lifting the weight of a bicycle.
Hanging Bicycles

Hang one bicycle by threading the front wheel spokes through the plasic covered T-Bar.  The 

next bicycle should be hung the same way, but facing the opposite 

direction.  (See photos to the right and on front cover) Continue 

the same procedure making sure that all the bicycles hang 

opposite to each other.  It is recommended that two people assist 

in hanging the bicycles to maintain the balance and stability of the 

Cycle Tree.

Dismounting Bicycles

  

Before lifting the front wheel off the Plastic Covered T-Bar (11), 

place a firm grip on the bicycle frame, just behind the front fork, 

making sure that the bicycle does not sway the wrong way, 

and carefully remove the bicycle from the Cycle Tree.  Maintain 

balance to obtain the best and safest performance of the 

Cycle Tree.  Be sure that multiple hanging bicycles are evenly 

distributed.

Maintenance

Periodically check that the hardware is tight.  Tighten if necessary.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL 

AS  A  REFERENCE  TOOL  ONLY.    NEITHER  THE  MANUFACTURER  NOR  DISTRIBUTOR  MAKES  ANY 

REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO 

MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS 

OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT 

ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED 

TECHNICIANS AND  NOT  BY  THE  BUYER.  THE  BUYER ASSUMES ALL  RISK AND  LIABILITY ARISING 

OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR 

ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

NOTE

: Some parts are listed and shown for illustration purposes only and are not available 

individually as replacement parts.

Summary of Contents for 02628








Reviews: