Page 5
For technical questions, please call 1-800-444-3353.
SKU 02628
Adjustment Holes
F
Plastic Covered T-Bar
G
4. Slide the Base Post (9) on top of the Base Beam (7) and join the Struts on the holes
provided on the Base Post (9).
5. Insert Center Post (10) into the Base Post (9) and secure with two bolts on the holes
provided.
6. Slide the T-Bar (11) on top of the Base Post (9) using the two lower holes of the four holes
provided on the center post for height adjustment.
7. Now hang your longest bicycle on the T-Bar, it should clear the base, but if it does not, you
may go up one hole to adjust the height of the T-Bar.
Note:
The lowest setting is desired to provide the most stability; this low setting also makes it
easier to hang the bicycles.
8. When assembly is complete, tighten all the self locking nuts.
Base Post
Center Post
E
Square
recess
of Base Beam
D
Flexible
opening
REV 03l, 06l, 09k, 10g, 11a
Insert Base Post (9) Here
