background image

Page 2

For technical questions, please call 1-800-444-3353.

SKU 02628 

        

Specifications

Dimensions

30” Square Base, adjusts from 69” to 72” high

Capacity

Up to 6 Bikes

Casters

7/8” W x 3” Diameter

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating 

and maintenance procedures, parts list and diagram.  Keep your receipt with this manual.  Write 

the receipt number on the inside of the front cover.  Keep the manual and  receipt in a safe and 

dry place for future reference.

Safety Warnings and Precautions

WARNING: When using the movable bicycle rack, basic safety precautions should always 

be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this movable bicycle rack!

1. 

Keep work area clean

.  Cluttered areas invite injuries.

2. 

Observe work area conditions

.  Do not use Cycletree in damp or wet locations.  Do 

not expose to rain.  Keep work area well lighted. Situate the Cycletree in a “child safe” 

location. Only use the Cycletree on a flat, level, hard surface.

3. 

Keep children away

.  Children must never be allowed in the work area.  Do not let them 

handle the Cycletree .  Do not let children remove or add cycles to the Cycle- tree.  Do not 

allow children to hang on or play with this product.

4. 

Store idle equipment

.  When not in use, Cycle Tree must be stored in a dry location to 

inhibit rust.  Always keep Cycle Tree out of reach of children.

5. 

Use the right tool for the job

.   There are certain applications for which this product was 

designed.  Do not modify this product and do not use this product for a purpose for which it 

was not intended.

6. 

Use eye protection

.  Always wear ANSI approved impact safety goggles during assembly.

7. 

Do not overreach

.  Keep proper footing and balance at all times..

8. 

Maintain this movable bicycle rack with care

.  Keep Cycle Tree clean for better and 

safer performance.  The handles must be kept clean, dry, and free from oil and grease at 

all times.

9. 

Stay alert

.  Watch what you are doing and use common sense when operating this piece 

of equipment.  Do not use this piece of equipment while tired or under the influence of 

drugs, alcohol or medication.

10. 

Check for damaged parts

.  Before using this movable bicycle rack, any part that appears 

damaged should be carefully checked to determine that it will operate properly and 

perform 

REV 03l, 06l, 09k

Summary of Contents for 02628








Reviews: