background image

10

Printed in China

GGLI2109

CARE AND MAINTENANCE

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for 
one (1) year from the date of purchase. If within this period the product is found to be defective, take 
a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of 
purchase. The distributor will, at its option, repair, replace or refund the purchase price to the 
consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. 
This warranty does not cover fixtures becoming defective due to misuse, accidental damage or 
improper handling and/or installation and specifically excludes liability for direct, incidental or 
consequential damages, improper packaging of returned products and acts of God. As some states 
do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may 
not apply. This warranty gives you specific rights and you may also have other rights which may vary 
from state to state.

WARRANTY

TROUBLESHOOTING

        WARNING: 

Before beginning work, shut off the power supply to avoid electrical shock.

Bulb will not light.

Fuse blows out or
circuit breaker trips.

1. Bulb is burned out.
2. Power is OFF.
3. Faulty connection.

1. Crossed wires.
2. Power wire is grounding out.

1. Check wiring.
2. Check all connections.

1. Replace bulb.
2. Make sure power supply is ON.
3. Check wiring and all connections.

  PROBLEM 

          POSSIBLE CAUSE 

CORRECTIVE ACTION

 

Shut off main power supply. Wipe fixture with a soft, damp cloth. Use window cleaner to clean  

  shade. Do not use an abrasive cleaner on shade or fixture.

Summary of Contents for WL136MW











Reviews: